Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.
We would like to briefly introduce the main test equipments that we have.
This equipment can control the temperature and humidity and is used for environmental test.
| Large type Constant Temperature Chamber |
Temp. range | -30 deg<--->+80 deg |
| Humidity range | 10%<--->95% RH | |
| Size | 3,020*2,500*1,900mm (W.D.H) | |
| Small type Constant Temperature Chamber |
Temp. range | -40 deg<--->+200 deg |
| Humidity range | 10%<--->95% RH | |
| Size | 600*800*850mm (W.D.H) | |
| Heat shock Test Chamberr |
Temp. range | -70 deg<--->+200 deg |
| Camber size | 650*460*370mm (W.D.H) | |
| Shock method | 2 zone or 3 zone method |
| Large type Constant Temperature Chamber | Heat Shock Test Chamber |
 |
 |
The following test devices are used to conduct various shipping test, impact test and drop test against the product or unit.
| Vertical Vibration Tester | Frequency range | 5Hz<--->1,000Hz |
| Test specimen weight capacity | 220kg | |
| Table size | 1,000*1,000mm | |
| Horizontal Vibration Tester | Frequency range | 1Hz<--->2,300Hz |
| Test specimen weight capacity | 2000kg | |
| Table size | 1,200*1,100mm | |
| Drop Test Equipment | Drop height | Max. 1,200mm |
| Test specimen weight capacity | 100kg |
| Vertical Vibration Tester | Horizontal Vibration Tester |
 |
 |
Equipment for equivalent impact drop tests of various products and/or units.
| Test specimen weight capacity | 200kg |
| Acceleration | 7G<--->300G |
| Duration | 3ms<--->45ms |
| Table size | 920*1,000mm |
| Shock Test Equipment |
 |
These equipments are used for various endurance tests such as open/shut, insert/eject, rotate, etc. for the products.
| Various insert/eject endurance tester | Open/shut endurance tester |
 |
 |
These equipments are used for various endurance tests such as open/shut, insert/eject, rotate, etc. for the products.
| Chamber size | 2,100*2,100*2,250mm |
| Acoustic isolation | 56dB (1kHz) |
| Floor load capacity | 200kg/m2 |
| Semi-anechoic room |
 |
This equipment is used to test the life of the product and/or unit from short to long terms.
| Room size | 10m*6m*2.5m (W.D.H) |
| Room temp. | Can be set to one's discretion
from normal? approx. 40 degrees Celsius |
| Power | 100V<--->260V continuous<--->1min
Can be set for ON/OFF operation |
| Life Test Room |
 |
Non-destructive testing of semiconductors, parts, etc. by x-ray. X-ray inspection system will be used for evaluating and analyzing solder-ability of BGA, CSP, etc.
| Ultra high resolution X-ray inspection system |
 |
These equipments are used for elemental analysis of material contained in parts or material for WEEE, RoHS, etc.
| Energy Dispersive X-Ray Fluorescence Spectrometer |
 |
Equipment for conducting cross section analysis of parts, PCB, lead free soldering, etc.
| Examples of SMD cross sectional check | Example of THD cross sectional check |
 |
 |
Fully capable of conducting various other validation tests other than what has been introduced above so please feel free to ask us anytime.
| Cable Flexing Tester | Device for testing bending and twists of various cables |
| Keystroke Tester | Device for testing keystrokes of keyboards, remote controls, etc. |
| Dust Tester | Device for testing the resistance against dust of sets, units, etc. |
| Combustion Tester | Device for testing flammability of parts, molds, etc. |
| Oil Resistance Tester | Device for testing oil resistance of products such as units to be installed in automobiles. |
| Various safety test equipment | Various test equipment for tests related to safety |
